Rockwell Automation 1771-DE Absolute Encoder Module User Manual - Manual (Page 68)

Appendix
D
DĆ1
Bit and Word Descriptions of Block-transfer Data
Control Word for Outputs 0 and 1
Bit No. Title Description
17 OE Output enable bit - set this bit if you want
output 1 turned on when comparisons with
presets 1A and 1B are true.
16 ZT Zero transition bit - set this bit when you want
output 1 energized during a transition through
position 000.
15 > Comparison bit for preset 1B
14 = Comparison bit for preset 1B
13 < Comparison bit for preset 1B
12 > Comparison bit for preset 1A
11 = Comparison bit for preset 1A
10 < Comparison bit for preset 1A
07 OE Output enable bit - set this bit if you want
output 0 turned on when comparisons with
preset 1A and 1B are true.
06 ZT Zero transition bit - set this bit when you want
output 0 energized during a transition through
position 000.
05 > Comparison bit for preset 0B
04 = Comparison bit for preset 0B
03 < Comparison bit for preset 0B
02 > Comparison bit for preset 0A
01 = Comparison bit for preset 0A
00 < Comparison bit for preset 0A
Block-transfer-write Data