Installation requirements – Rockwell Automation 1788-EN2FFR Redundant EtherNet/IP to FOUNDATION Fieldbus Linking Device User Manual
Page 2
2 Redundant EtherNet/IP to FOUNDATION Fieldbus Linking Device
Publication 1788-QS006A-EN-P - October 2012
Installation Requirements
The following software and hardware tools are required to successfully install and configure the
1788-EN2FFR linking device.
Software Requirements
The following software is required to configure the 1788-EN2FFR linking device:
•
The RSLogix™ 5000 Add-on Profile (AOP) is required to configure and perform
diagnostics on the 1788-EN2FFR linking device.
•
The Device Type Manager (catalog number 1788-EN2FFR DTM) is required for Asset
Management connectivity with field devices.
Hardware Requirements
The following hardware is required to install and configure the 1788-EN2FFR linking device:
•
A 24…32V DC power supply
•
An EtherNet/IP connection via a RJ45 connector