Rockwell Automation 1788-EN2FFR Redundant EtherNet/IP to FOUNDATION Fieldbus Linking Device - Manual (Page 3)

Redundant EtherNet/IP to FOUNDATION Fieldbus Linking Device 3
Publication 1788-QS006A-EN-P - October 2012
•
An H1 network using IEC 61158-2 cable color coding
Configuration
Complete the following instructions to configure the 1788-EN2FFR linking device.
Configure the Ethernet Address
The module has BOOTP enabled when
shipped. You can set an address via a
BOOTP server or set the hardware
switches to a specific IP address. See
Use
BOOTP to Set the IP Address on page
4 , or Use Switches to Set the IP Address
on page 4 for details. The switches can be
found under the front cover of the
module.