Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.1 Quick Start Guide User Manual
Page 2
Last Revised: January 13, 2010 14:16:43
Contact Rockwell
Copyright Notice
© 2010 Rockwell Automation Technologies, Inc. All rights reserved. Printed in USA.
This document and any accompanying Rockwell Software products are copyrighted by
Rockwell Automation Technologies, Inc. Any reproduction and/or distribution without
prior written consent from Rockwell Automation Technologies, Inc. is strictly
prohibited. Please refer to the license agreement for details.
Trademark Notices
Allen-Bradley, Arena, ControlLogix, Datapac, FactoryTalk, Rockwell Automation,
Rockwell Software and the Rockwell Software logo are registered trademarks of
Rockwell Automation, Inc.
The following logos and products are trademarks of Rockwell Automation, Inc.:
RSLogix
Logix5000
Other Trademarks
ActiveX, Microsoft, Microsoft Access, SQL Server, Visual Basic, Visual C++, Visual
SourceSafe, Internet Explorer, Windows, Windows ME, Windows NT, Windows 2000,
Windows Server 2003, and Windows XP are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
Ethernet is a registered trademark of Digital Equipment Corporation, Intel, and Xerox
Corporation.
All other trademarks are the property of their respective holders and are hereby
acknowledged.
Warranty
This product is warranted in accordance with the product license. The product’s
performance may be affected by system configuration, the application being
performed, operator control, maintenance, and other related factors. Rockwell
Automation is not responsible for these intervening factors. The instructions in this
document do not cover all the details or variations in the equipment, procedure, or
process described, nor do they provide directions for meeting every possible
contingency during installation, operation, or maintenance. This product’s
implementation may vary among users.
This document is current as of the time of release of the product; however, the
accompanying software may have changed since the release. Rockwell Automation,
Inc. reserves the right to change any information contained in this document or the
software at anytime without prior notice. It is your responsibility to obtain the most
current information available from Rockwell when installing or using this product.