Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.1 Quick Start Guide - Manual (Page 34)

F ACTORY T ALK H ISTORIAN ME Q UICK S TART G UIDE
30
•
• •
In addition to FactoryTalk Historian SE and ME Information, the
file information for the searched data points is displayed in table
format. The table lists all data points that fit the search criteria. If
the point has been created in the FactoryTalk Historian SE Server,
then this is indicated in the table. All “checked” points are tagged
for transfer to the FactoryTalk Historian SE Server.
File information includes the following fields:
Auto Transfer
Mode This displays whether Auto Transfer is on
or off. If Auto Transfer in “On”, then
FactoryTalk Historian ME is set to
automatically transfer data based on the
settings on the Data Transfer page.
Newly Added
Points This represents the total number of points
recently selected for transfer to
FactoryTalk Historian SE.
Column Name Column Description
Selected This indicates whether or not the point has
been added to Data Transfer. Check the
box under Selected to add the point to data
transfer.
Name This is the name of the data point in
FactoryTalk Historian ME.
Type This is the data type of the point. See Data
Types in the FactoryTalk Historian ME
User’s Guide or online help for a detailed
description of the data types.
Source This indicates which ControlLogix
processor the data point is coming from.
Property Name Property Description