Rockwell Automation 1794-OE8H, Series B Flex I/O Output HART Module Installation Instructions - Manual (Page 29)

FLEX I/O 8 Output HART Analog Module 29
Publication 1794-IN109D-EN-P - January 2014
Specifications
FLEX I/O 8 Output HART Analog Module - 1794-OE8H, Series B
Attribute Value
Number of outputs 8 single-ended, non-isolated
Module base Catalog numbers 1794-TB3G, 1794-TB3GS
Resolution 13 bits
Absolute accuracy 0.1% Full Scale @ 20 °C (68°F)
Accuracy drift with
temperature (1)
0.010% Full Scale for 0 °C...55 °C (32...131 °F)
Functional data range >15V @ 22 mA
>22V @ 0 mA
Data format Configurable
Step response to 99% of FS 4 ms
Conversion type Sigma Delta
Update rate see input update rate table
Output terminals (Terminals: 0...2; 4...6; 8...10; 12...14;
17...19; 21...23; 25...27; 29...31)
Power Supply
(Terminals: 34/50 (+);
35/51 (-))
24V DC nominal using Catalog number 1794-PS13
19.2…31.2V DC (includes 5% ripple)
Indicators 8 red fault indicators
8 yellow HART communication indicators
1 green power
Isolation voltage 50V (continuous), Basic Insulation Type
Routine tested at 850V DC for 1 s, between field side and
system
No isolation between individual channels
Voltage variation IEC 61000-4-29:
10 ms interruption on DC supply ports