Rockwell Automation 1792D-16BT0LP INSTL INSTR ARMORBLOCK LP2 16 - Manual (Page 4)

4 ArmorBlock LP2 16 Sinking Input Module
Publication 1792D-5.29 - January 1999
Input connectors for this module are shown below.
DeviceNet Cable
Refer to the DeviceNet Cable and Planning Installation manual for more
information on DeviceNet cabling for you module.
!
ATTENTION:
• Make sure all connectors and caps are securely tightened
to properly seal the connections against leaks and
maintain IP67 requirements
• For maximum noise immunity, input and output cable
return wires must be properly terminated. When inputs
and outputs are connected in loopback, return wires
should be connected together.
• I/O cable length should be less than 30 meters.
I-4
I-5
I-6
I-7
I-11
I-10
I-2
I-3
I-13
I-12
I-9
I-8
Network Status Module Status
I-0
I-1
I-15
I-14
30722-M
Input 0
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Input 15
Input 14
Input 13
Input 12
Input 11
Input 10
Input 9
Input 8
Connector A
Connector B
Connector C
Connector D
Connector H
Connector G
Connector F
Connector E