Rockwell Automation 1746-NO8V SLC 500 8-Point Analog Output Module/ User Manual - Manual (Page 26)

Publication 1746-UM026A-EN-P - September 2003
4-2 Configuring the Module
Configuring the Module
Using RSLogix 500 RSLogix 500 version 6.10 (and later) includes an advanced
configuration wizard to assist in configuring the 1746-NO8 module
when Class 3 mode is used.
1. To bring up the I/O Configuration interface, double-click on the
I/O Configuration icon.
2. Assign the 1746-NO8 to a chassis slot and select Class 3
operation.