Rockwell Automation 1746-NO8V SLC 500 8-Point Analog Output Module/ User Manual - Manual (Page 5)

1 Publication 1746-UM026A-EN-P - September 2003
Preface
Read this preface to familiarize yourself with the rest of the manual. It
provides information concerning:
•
who should use this manual
•
the purpose of this manual
•
related documentation
•
conventions used in this manual
•
Rockwell Automation support
Who Should Use this
Manual Use this manual if you are responsible for designing, installing,
programming, or troubleshooting automation control systems that use
Allen-Bradley small logic controllers.
You should have a basic understanding of SLC 500 products. You
should understand electronic process control and be able to interpret
the ladder logic instructions required to generate the electronic signals
that control your application.
If you do not, contact your local Allen-Bradley representative for the
proper training before using this product.
Purpose of this Manual This manual is a learning and reference guide for 1746-NO8 analog
output module. It contains the information you need to install, wire,
and configure the module. It also provides diagnostic and
troubleshooting information and programming examples
Common Techniques Used
in this Manual The following conventions are used throughout this manual:
•
Bulleted lists such as this one provide information, not
procedural steps.
•
Numbered lists provide sequential steps or hierarchical
information.
•
Italic type is used for emphasis.
•
Text in bold type indicates words or phrases you should type