Rockwell Automation 1734-IE2C_2V POINT I/O 2 Current and 2 Voltage Input Analog Modules - Manual (Page 4)

4 POINT I/O 2 Current and 2 Voltage Input Analog Modules
Publication 1734-IN027A-EN-E - May 2005
Before You Begin
Read this manual for information about how to install the following
modules.
• 1734-IE2C, Series C, POINT I/O Current Input Analog Module
• 1734-IE2V, Series C, POINT I/O Voltage Input Analog Module
You can use these Series C modules with DeviceNet and PROFIBUS
adapters. If you are using RSLogix 5000 software version 11 or higher,
you can also use these Series C modules with ControlNet and
Ethernet adapters.
ATTENTION
Preventing Electrostatic Discharge
This equipment is sensitive to electrostatic
discharge, which can cause internal damage and
affect normal operation. Follow these guidelines
when you handle this equipment:
• Touch a grounded object to discharge
potential static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on
component boards.
• Do not touch circuit components inside the
equipment.
• If available, use a static-safe workstation.
• When not in use, store the equipment in
appropriate static-safe packaging.