Rockwell Automation 1760 PICO Programming Quick Start - Manual (Page 13)

T1
+
10.00
TRG
RES
X
S
C
PICO™ Programming
Configuring the 10 second
timer
Now you will enter a preset
timer value for Timer #1.
Press P1 and then the P3
button twice. You should be
on the “0”. Press P2 to
change the “0” to a “1”.
Your display should now look
like the screen to the left.
Press the OK button twice.
Unlatch the output contact
Press the Alt button followed
by the the P3 button three
times. Press Okay Button.
Press P1 to move the cursor
to the flashing bracket. Press
P2 once to change the bracket
to “R” (reset). Press P3 twice
to move the cursor the
flashing “1”. Press P2 to
change the display to the
number “6”. Press the OK
button.
Your screen should look like
this at the end of Step 10.
I 2 - - - - - - - - SQ
Q6 - - - - - - - - TT1
T1 - - - - - - - - RQ6
pico_booklet_ra 4/15/03 11:35 AM Page 12