Rockwell Automation 1760 PICO Programming Quick Start - Manual (Page 3)

PICO™ Programming
Program PICO yourself in
11 Easy Steps.
After the completion of the following
exercise, you will have programmed the
Allen-Bradley PICO Controller. The
program simulates starting a motor for
10 seconds and then turns the motor off.
Your program will look like the following:
I 2 - - - - - - - - SQ6
Q6 - - - - - - - - TT1
T1 - - - - - - - - RQ6
I 2
SQ6
Q6
TT1
T1
RQ6
Physical input #2 to which the START button
is wired to.
This sets, or latches output #6 to which the
coil of the contactor is wired to.
Output #6 (contactor coil) contact
On delay Timer #1 (10 seconds)
Timer#1 contact
This resets, or unlatches output #6.
pico_booklet_ra 4/15/03 11:35 AM Page 2