Rockwell Automation 1760 PICO Programming Quick Start - Manual (Page 7)

PICO™ Programming
Adding an input
instruction
Press the OK button to inset
the first instruction. You’ll
notice the “
I ” flashing.
Your screen should look like
this at the end of Step 3.
Changing the input
contact number
Press P3 to highlight the “1”.
Press P2 and change the the
input to
I 2. Press the OK
button followed by the Alt
button. Your display should
look similar to the one to the
left.
I 2
I 2
pico_booklet_ra 4/15/03 11:35 AM Page 6