Rockwell Automation 1785-TR10B5 Coax Transceiver for 10BASE5 Installation Instructions User Manual

Coax transceiver for 10base5, Installation instructions

Advertising
background image

1785-5.17 - January 1999

Installation Instructions

Coax Transceiver for 10BASE5

Catalog Number 1785-TR10B5

The coax transceiver lets you connect a device with an AUI interface to a 10
Mbit/s CSMA/CD LAN (ISO/IEC 8802-3, IEEE 802.3, 10BASE5) coax
cable connection via this cable piercing tap.

•

Monitoring LEDs for
– power
– collision/jabber control
– data

•

SQE test can be disabled
externally

•

Compact construction

To the Installer

Description

The 1785-TR10B5 coax transceiver can be connected to the AUI interface
of a device either directly or via an AUI cable. It is connected to the coax
cable by a coax interface.

The transceiver offers these functions according to IEEE 802.3 10BASE5:

•

receiving the data at the transceiver interface and sending them into the
coax cable

•

receiving the data from the coax cable and sending them to the
transceiver interface

•

indication via a yellow LED of data transmission and reception through
the coax cable

•

detection of data collisions in the network and reporting them to the
terminal equipment as well as indicating them by a red LED

•

ability to enable/disable the SQE test: at the end of every transmit
operation, a short collision signal (heart beat) approx. 1 µs long is sent to
monitor the electronics

•

jabber control and display: protecting the network from data packets that
are too long (> 20 ms)

Topic

Page

Description

1

Installation

2

Coupling the Transceivers with the Coax Cable (10BASE5)

2

Compliance to European Union Directives

4

Technical Data

7

Advertising