Rockwell Automation 1790P-T4T0 CompactBlock LDX I/O Thermocouple Modules - Manual (Page 22)

Publication 1790-UM003A-EN-P - May 2002
2-8 Installation and Wiring
5. Replace the block on the panel and place a screw through each of
the two mounting holes. Tighten the screws until the block is
firmly in place
.
DIN Rail Mounting
1. Hook the top slot of the block over the DIN Rail.
2. Pull down on the locking lever while pressing the block against
the rail .
3. Push up on the locking lever to secure the block to the rail when
the block is flush against the rail.
CompactBlock LDX
1790-16BVOX EXPANSION UNIT
16 INPUTS-DCPOWER
0
7 0
7
41 mm
1.6 in
95 mm
3.74 in
Expansion
Cover
43242
Locking Lever
f
43243