Rockwell Automation 1790P-T4T0 CompactBlock LDX I/O Thermocouple Modules - Manual (Page 45)

Publication 1790-UM003A-EN-P
Module Data, Status, and Channel Configuration for DeviceNet 3-15
Configure DeviceNet
Thermocouple/mV
Modules Using
RSNetWorx Following the steps below to configure 1790D-4T0/T4T0 thermocouple/
mV modules.
1. Open RSNetWorx for DeviceNet.
2. Using the selections on the left of the window below, construct you
system. (If your network is up, just click on the Online Browse
button.)
Online Browse
Button