Rockwell Automation 1790P-T4T0 CompactBlock LDX I/O Thermocouple Modules User Manual
Page 91
Advertising

Publication 1790-UM003A-EN-P
Module Configuration for PROFIBUS E-3
You can add modules to the network by:
1. Selecting slaves from the PROFIBUS Device pane
2. Dragging and dropping them to the network pane
Or, if online, by performing a search for slaves
See the following screens for an outline of this procedure.
Choose the
Master
communication
parameters
First, configure the network search properties.
Second, search for slave modules.
Advertising
This manual is related to the following products: