Rockwell Automation 1792D-CB18PT ArmorBlock MaXum I/O Cable Bases Series B - Manual (Page 2)

2 ArmorBlock MaXum I/O Cable Bases Series B
Publication 1792D-IN036B-EN-P - September 2000
These instructions describe the installation of each cable base. The
catalog numbers for the cable bases are:
• 1792D-CB18 for 18mm trunk or drop cable installation
• 1792D-CB18P, -CB18PT for 18mm trunk or drop cable
installation when an auxiliary output power connection is
necessary
Install Your ArmorBlock Cable Base
To install the cable base:
• Mount the cable base
• Attach the module to the base
• Attach the cables
These procedures are explained in detail in the following sections.
IMPORTANT
ArmorBlock MaXum modules and media cables are
ordered and shipped separately.