Rockwell Automation 1792D-CB18PT ArmorBlock MaXum I/O Cable Bases Series B - Manual (Page 7)

ArmorBlock MaXum I/O Cable Bases Series B 7
Publication 1792D-IN036B-EN-P - September 2000
Use the graphics below to connect DeviceNet cable to your module.
Specifications
I/O Cable Bases - Cat. No. 1792D-CB18, -18P, -18PT
General Specifications
For general specifications, see the ArmorBlock MaXum module’s documentation or the
Technical Data, publication number 1792-TD001B-EN-P. The specifications listed in
these publications are for the assembled module and cable base.
2
1 5
3
4 2
4 2
1 3
4
1 3
1 5
3
4 2
41878
DeviceNet In Connector (looking
into pins)
Auxiliary Output Power In Connector
(looking into pins)
Pin 1 Drain
Pin 2 V+
Pin 3 V-
Pin 4 CAN_H
Pin 5 CAN_L
Pin 1 24Vdc
Pin 2 Not Used
Pin 3 Not Used
Pin 4 Return
DeviceNet Out Connector (looking
into sockets)
Auxiliary Output Power In Connector
(looking into sockets)