Rockwell Automation 1732D-XXXX DeviceNet ArmorBlock I/O, Series A - Manual (Page 5)

Publication 1732D-IN001B-EN-E - May 2004
DeviceNet 1732 ArmorBlock I/O, Series A 5
Mount the Module Each module has two sets of mounting holes that are used to mount
the module directly to a panel or machine. The module can be front
or side mounted. Mounting holes accommodate #6 (M3) pan head
screws. The torque specification is 6 in-lbs.
1.46in. (37mm)
.67in. (17mm)
.78in.
(19.8 mm)
6.56in. (166.5mm)
6.64in. (168.6mm)
7.05in. (179mm)
1.06in.
(27mm)
1.70in.
(43.3mm)
1.26 in.
(32mm)
9577597-101
Front Mounting
Side Mounting