Rockwell Automation 1732D-XXXX DeviceNet ArmorBlock I/O, Series A - Manual (Page 6)

Publication 1732D-IN001B-EN-E - May 2004
6 DeviceNet 1732 ArmorBlock I/O, Series A
Mount the Module in High Vibration Areas
If you will mount the module in an area that is subject to shock or
vibration, we recommend that you use a flat and lock washer to
mount the module. Mount the flat and lock washer as shown in the
following illustration. Torque the mounting screws to 6 in-lbs.
Connect the Input/Output
Cord Sets to the
ArmorBlock Module The ArmorBlock family offers 5-pin micro-style PCB mounting
connectors or 3-pin pico-style PCB mounting connectors.
We provide caps to cover the unused connectors on your module.
Connect the quick-disconnect cord sets you selected for your module
to the appropriate ports.
43619
Flat Washer
Lock Washer