Rockwell Automation 1785-CHBM ControlNet Hot Backup Quick Start - Manual

Publication 1785-QS001A-EN-P - January 2001
4XLFN 6WDUW
ControlNet PLC-5 Hot Backup System
(Including ControlNet PLC-5 Hot Backup Cartridge, Cat. No. 1785-CHBM)
The ControlNet PLC-5 backup system requires a pair of standard
PLC-5/40 or PLC-5/80 ControlNet processors, with I/O connected
remotely over ControlNet.
Note: To use the hot backup system, you must first install a
ControlNet Backup Cartridge (Cat. No. 1785-CHBM) into each PLC-5
processor. Install the cartridges in the processor’s EEPROM memory
module slot.
Use this Quick Start to get your ControlNet PLC-5 backup system up
and running quickly. For more detailed information on this process,
refer to the ControlNet PLC-5 Hot Backup System User Manual
(publication 1785-6.5.24) and the ControlNet PLC-5 Programmable
Controllers User Manual, phase 1.5 (publication 1785.6.5.22).
This document contains these sections:
Section Page
System Requirements 2
Installing the Hardware 3
Configuring Your Backup System 4