Rockwell Automation Logix5000 Logix5000 Controllers Quick Start - Manual (Page 9)

9 Publication 1756-QS001E-EN-P - October 2009 9
Preface
About This Publication
Use this manual to get started programming and maintaining Logix5000 controllers.
This manual describes the necessary tasks to do the following.
• establish communication with a Logix5000 controller
• program a Logix5000 controller
• perform online maintenance tasks such a search and edit logic, run a histogram, clear faults, and force
I/O values.
Required Software
To complete this quick start, the following software is required:
• RSLogix 5000 software, version 18 or later
• RSLinx Classic software, version 2.51