Rockwell Automation 1784-PCM4/B CABLE - Manual (Page 2)

1784-PCM4/B Cable 2
Publication 1784-5.21 – January 1997
Attach the Wedges
!
ATTENTION: You must attach the wedge that is
provided with your cable to the computer. This wedge
provides strain relief for the cable and secures the cable to
the computer so the cable is not accidently disconnected.
If you do not use the wedge and the cable disconnects, it
can damage the connector on the cable and the card.
1. Slide the wedge into the slot on the bottom of the cable’s electronics
pod as shown below.
19875
electronics pod