Rockwell Automation 1784-PCM4/B CABLE - Manual (Page 3)

1784-PCM4/B Cable 3
Publication 1784-5.21 – January 1997
2. Position the assembly on the computer so the narrow end of the
wedge is closest to the PCMCIA slot. When you find the best location
for the wedge, use a pencil to mark the location on the computer.
length of cable from
connector to
electronics
pod is 17.8 cm (7 in.)
19875–M
3. Separate the wedge from the electronics pod.
4. Remove the paper backing from the wedge.
19950
!
ATTENTION: The adhesive on the wedge is very strong.
Once you remove the protective paper and attach the
wedge to the computer, you cannot remove the wedge.
Be sure you are confident about the position of the wedge
before you secure it.