Rockwell Automation 1784-PCM4/B CABLE - Manual (Page 4)

1784-PCM4/B Cable 4
Publication 1784-5.21 – January 1997
5. Place the wedge on the computer where you marked the location.
19873
Connect the Cable
Important: When installing your 1784-PCM4/B cable, make sure you:
•
securely attach the cable connector to the 1784-PCMK/B card (check
this connection if you are experiencing communication problems)
•
use the wedges to support the weight of the pod
•
do not bump the cable or connected hardware and inadvertently
disconnect the cable
1. Slide the cable’s electronics pod onto the wedge on the computer.
19875-M