Rockwell Automation 1769-IQ16F Compact 24V dc Sink/Source Input Module - Manual (Page 12)

12 Compact 16-point 24V dc Sink/Source High-speed Input Module
Publication 1769-IN064A-EN-P - April 2003
1769-IQ16F Configuration File
The read/writable configuration data file allows the setup of the digital filter settings
for each of the two input groups. Group 0 is inputs 0 - 7, Group 1 is inputs 8 - 15.
The manipulation of the bits from this file is normally done with programming
software (e.g., RSLogix 500, RSNetworx for DeviceNet, etc.) during initial
configuration of the system. In that case, graphical screens are provided via the
programmer to simplify configuration. However, some systems (e.g., 1769-ADN
DeviceNet Adapter) also allow the bits to be altered as part of the control program
using communication rungs. In that case, it is necessary to understand the bit
arrangement.
Spare/Replacement Module Parts
• Terminal Block: 1769-RTBN18 (1 per kit)
• Door Label: 1769-RL1 (2 per kit)
• Door: 1769-RD (2 per kit)
Wo
rd
Bit Position
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 Filter Time On to Off
Group 1
Filter Time Off to On
Group 1
Filter Time On to Off
Group 0
Filter Time Off to On
Group 0
1 0000000000000000
2 0000000000000000
3 0000000000000000
Filter Time
(1)
(1)
Filter Time: Word 0, the Filter Time configures
the ON to OFF and OFF to ON hardware delay
times for each input group.
Bit Setting
2.0 msec 0010
1.0 msec 0011
0.5 msec 0100
0.1 msec 0101
0.0 msec 0110