Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.1 Installation Instructions - Manual (Page 12)

12 FactoryTalk Historian Machine Edition Module
Publication 1756-IN611A-EN-P - February 2010
Install the Module in the Chassis
1
Slide the module into the chassis. Make sure
the module backplane connector properly
connects to the chassis backplane.
2
The module is properly installed
when it is flush with the power
supply or other installed
modules.
Circuit Board
3
Align the circuit board with the
top and bottom guides in the
chassis.