Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.1 Installation Instructions - Manual (Page 20)

20 FactoryTalk Historian Machine Edition Module
Publication 1756-IN611A-EN-P - February 2010
Application Status
The Application Status is composed of four application subsystems, as
described in the following table.
Note: If more than one of the four statuses exist, then they are displayed one
after another with a two second duration between each message.
Application Subsystem Status Description
Configuration status A. Not configured
B. No points
If neither Data Transfer
or Data Collection is
configured, then the “Not
configured” status is
displayed. Otherwise, the
status is empty. Note:
Data Collection is not
configured if the number
of subscribed points from
the data server is zero
(0). If Data Collection
is
not configured, but Data
Transfer
is configured,
then the configuration
status is “No points.”
Otherwise, the status is
empty. Note:
Data
Transfer is not
configured if the SE Host
Server Name or IP
address is not entered or
is not resolved. The
status is “No upload.”