Rockwell Automation 1738-AENTR Armorpoint 2 Port Enet Adapter - Manual (Page 10)

10 ArmorPoint I/O 2-Port EtherNet/IP Adapter, Series A
Publication 1738-IN028B-EN-E - February 2010
Refer to publication 1738-UM014, ArmorPoint I/O EtherNet/IP Adapter
User Manual, for more information.
Wire the EtherNet/IP Adapter
Following are wiring instructions for the ArmorPoint EtherNet/IP adapter.
1738-AENTR EtherNet/IP Connectors
1738-AENTR Auxiliary Power Connector
IMPORTANT
Analog modules have earth grounded metal rings. This should be considered
when choosing shielded cables and grounding techniques.
ATTENTION
Make sure all connectors and caps are securely tightened to properly seal the
connections against leaks and maintain IP enclosure type requirements.
(view into connector)
Pin 1 - Tx +
Pin 2 - Rx +
Pin 3 - Tx -
Pin 4 - Rx -
M12 Female In Connector
43765
(view into connector)
Pin 1 - User Power +
Pin 2 - Adapter Power +
Pin 3 - Adapter Power -
Pin 4 - User Power -
43587
M18 Male In Connector