Rockwell Automation 1768-EWEB CompactLogix EtherNet/IP Web Server Module Installation Instructions - Manual (Page 15)

CompactLogix EtherNet/IP Web Server Module 15
Rockwell Automation Publication 1768-IN007B-EN-P - August 2010
Connect the Module
Attach the RJ45 connector to the Ethernet port on the bottom of the module.
WARNING: If you connect or disconnect the cable with power
applied to this module or any device on the network, an electrical
arc can occur. This could cause an explosion in hazardous location
installations. Be sure that power is removed or the area is
nonhazardous before proceeding.
IMPORTANT We recommend connecting the module to the network via a
100 MB Ethernet switch, which will reduce collisions and lost
packets and increase network bandwidth. For detailed
EtherNet/IP connection information, see the EtherNet/IP
Modules in Logix5000 Control Systems User Manual, publication
ENET-UM001 .
Item Description
1 Ethernet port
1
31611-M