Rockwell Automation 1738-AENTR, Series A 1734 POINT I/O and 1738 ArmorPOINT I/O 2 Port Ethernet/IP Adapter User Manual - Manual (Page 59)

Rockwell Automation Publication 1734-UM014B-EN-P - June 2013 51
Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software Chapter 5
3. Expand the Communications tree, as in the following dialog and select the
1756-ENBT EtherNet/IP Bridge.
4. Click OK.
The Select Major Revision dialog opens.
5. Select the value for Major Revision and click OK.
The Module Properties dialog opens.
6. Enter values for Name, IP Address, Slot, Electronic Keying, and Revision,
noting we used the following values:
Name Local_ENB
IP Address 10.88.70.4
Slot 3
Electronic Keying Compatible Module
Revision 3.1