Rockwell Automation 1762-IQ16 DC Input Module - Manual (Page 15)

MicroLogix 1762-IQ16 DC Input Module 15
Publication 1762-IN010C-EN-P - June 2013
Specifications
General
Attribute Value
Dimensions, HxWxD 90 x 40.4 x 87 mm (3.54 x 1.59 x 3.43 in.)
Shipping weight, approx. 230g (8.11oz)
Wire size See Wire Size and Terminal Screw Torque on page 13
Wiring category (1)
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and
Grounding Guidelines, publication
1770-4.1 .
2 - on signal ports
Pilot duty rating Not rated
Enclosure type rating IP20
North American temp code T3C
Input
Attribute Value
Voltage category 24V DC (sink/source) (1)
Operating voltage range 10…30V DC
10…26.4V DC. See
Derating Charts on page 17 .
Number of inputs 16
Bus current draw, max 70 mA @ 5V DC (0.35 W)
Heat dissipation, max. 5.4 Total Watts @ 30V DC
4.3 Total Watts @ 26.4V DC
Signal delay, max On Delay: 8.0 ms
Off Delay: 8.0 ms
Off-State voltage, max 5V DC
Off-State current, max 1.5 mA
On-State voltage, min 10V DC
On-State current 2.0 mA min @ 10V DC
8.0 mA nom @ 24V DC
12.0 mA max @ 30V DC
Nominal impedance 3K ohm
IEC input compatibility Type 1
Isolated groups Group 1: inputs 0…7; Group 2: inputs 8…15
Input group to backplane Isolation Verified by one of the following dielectric tests: 1200V AC for 1s or
1697V DC for 1s
75V DC working voltage (IEC Class 2 reinforced insulation)