Rockwell Automation 1775-S4B,D17756.5.3 User Manual SCANNER/MSG HND - Manual (Page 19)

Installing Your 1775ĆS4B Scanner
Chapter 3
3Ć5
Figure 3.5
Connecting an Industrial Terminal to the 1775ĆS4B Scanner Using
Remote I/O Interconnect Cable
Industrial Terminal System
(Cat. No. 1770ĆT1, T2, T3, or T4)
RightĆAngle Hood
I/O ScannerĆ
message
Handling
Module
(Cat. No.
1775-S4B)
User-Supplied 25ĆPin Male Connector,
Cannon Type DBĆ25Ć05, Male, or equivalent
Cat. No. 1778ĆCR Cable or equivalent
(5000 ft. or 1524m maximum) Channel B
a) Connection Diagram
UserĆSupplied
Connector
UserĆSupplied
Connector
Cat. No. 1778ĆCR
Cable or equivalent
5000 ft. or 1524 m
maximum
b) Wiring Diagram
Industrial
Terminal
Channel B
I/O ScannerĆ
Message
Handling
Module
(Cat. No.
1775-S4B)
25
14
18
3
2
1
25
18
3
25
14
18
3
2
1
25
18
3
The I/O terminal swing arm provides cable connection for Twinaxial Cable
(cat. no. 1770-CD) which connects to 1771 I/O chassis. This swing arm
contains terminals for I/O channels 1 thru 4. Figure 3.6 shows how to wire
the 1770-CD cable to the terminals on the terminal swing arm.
3.3
Using the 1775ĆS4B
Scanner's I/O Terminal
Swing Arm