Rockwell Automation 2727-MRT5_10_15_20 MobileView Connection Cable Installation Instructions User Manual
Page 5
Advertising
MobileView Connection Cable 5
Publication 2727-IN004C-MU-P
Attaching the Connection Cable to the MobileView Terminal
Removing the Back Cover
1. Place the terminal on a stable, flat surface.
2. Remove the 6 screws that secure the back cover to the MobileView terminal.
3. Carefully lift off the back cover and place it on a secure surface.
ATTENTION
!
Turn off the power supply before removing the back cover of
the MobileView terminal.
When the back cover is removed, the MobileView terminal is
sensitive to electrostatic discharge (ESD).
Back Cover
Screws
Advertising