Rockwell Automation 6180 Removable Media CD ROM Floppy Drives (for 6180 Industrial Computers) - Manual (Page 5)

Removeable Media 5
8. If you are removing a floppy drive, remove the screws which
secure the floppy drive to the bracket. CD ROM drives do not
have a bracket and are mounted directly to the chassis.
Floppy Drive Bracket
(Catalog No. 6189-LBFDBRKT)
Drive Mounting Screws (4)
Floppy Drive
To install a front or rear facing drive:
1. If installing a floppy drive, secure the floppy drive to the floppy
drive bracket. The CD ROM drive does not require a bracket.
2. Position the CD ROM or floppy drive / bracket assembly into the
chassis.
3. Connect the cable connectors to the drive. Connectors are keyed
so they cannot be installed backwards.
4. Align the CD ROM or floppy drive / bracket with the chassis
mounting holes and secure with the mounting screws:
•
front facing CD ROM requires 4 screws
•
rear facing CD ROM drive requires 2 screws
5. Swing the chassis back onto the bezel and secure chassis with the
three latching screws.
6. Install the back panel and the accessory drive panel.