Rockwell Automation 2711P-Rxxxx Logic Module, Internal CompactFlash, and RAM - Manual (Page 5)

Logic Module, Internal CompactFlash, and RAM 5
Publication 2711P-IN004J-EN-P - September 2009
Required Tools
The following tools are required for installation:
•
#1 and #2 Phillips screwdriver
•
Electrostatic discharge (ESD) wristband
Component Compatibility for PanelView Plus CE Terminals
It is important to match the series of the internal CompactFlash card with the correct series
of the logic module and software version. The series of the CompactFlash determines the
version of FactoryTalk View ME software and version of the operating system. The logic
module is available with or without memory installed.
Logic Module Compatibility
6189-RPx, 6189-RPRHx, 6189-RPEHx,
2711P-RPx, 2711P-RPx, 2711P-RP6x,
2711P-RP7x
Internal CompactFlash
6189-RW2, 6189-RW3,
6189-RW4, 2711P-RW6,
2711P-RW7, 2711P-RW8
FactoryTalk View ME and
OS Software Version
Series A: 6189-RPxH/A (1)
(1) When upgrading from FactoryTalk View ME software, version 3.0 to 3.10 or later, the Firmware Upgrade Kit is
recommended.
Series B: 6189-RWx/B FactoryTalk View ME 3.0
Windows CE 3.0
Series B: 6189-RPxH/B Series C: 6189-RWx/C FactoryTalk View ME 3.10
Windows CE 4.1
Series B: 6189-RPxH/B
Series C: 6189-RPxH/C
Series D: 6189-RPxH/D
Series E: 6189-RPxHx/E
Series F: 2711P-RPxx/F (2)
Series G: 2711P-RPxxx/G (2)
(2) Series F and later logic modules work with PanelView Plus and PanelView Plus CE CompactFlash cards.
Series D: 6189-RWx/D
Series E: 6189-RWx/E
FactoryTalk View ME 3.20
Windows CE 4.1
Series F: 6189-RWx/F
Series G: 6189-RWx/G
Series H: 2711P-RWx/H
FactoryTalk View ME 4.0
Windows CE 4.1
Series J: 2711P-RWx/J FactoryTalk View ME 5.0 or 5.1
Windows CE 4.1