Rockwell Automation 2364,2364E NRU DC Suppressor Replacement - Manual

Publication 2364E-5.16 - April 1998
R EPLACEMENT K IT I NSTRUCTIONS
NRU™ DC Suppressor Replacement
(180 - 350A DC)
The DC suppressor circuit consists of 2 resistors, 1 capacitor, and 1
diode. In the 180 and 350A DC units, the components are all
mounted on the main subpanel.
What This Kit Contains Using the table below, verify that you have received the appropriate
items in your kit:
Other Items Needed Before you begin, be sure you also have the following:
• Whatever tool(s) you will need to:
• Disconnect and connect wiring
• Remove, loosen, and/or tighten nuts
• Remove, loosen, and/or tighten screws
• Documentation:
• Your drive system schematics
• Publication 2364E-5.01, Non-Regenerative DC Bus Sup-
ply (NRU) User Manual
For this part: You should receive this quantity:
diode 1
capacitor 1
resistor 2