Rockwell Automation AutoMax Prog Exec V4.2 and Dist. Power System Drive Software Install User Manual
Page 17
6Ć1
6.0 INSTALLING ADDITIONAL
5ĆUSER LICENSES FOR
SHAREDĆUSER EXECUTIVE
SOFTWARE
The number of users having access to the sharedĆuser Executive
software on a network can be increased by using the additional 5Ć
user license (M/N 57C627). The sharedĆuser Executive software
must already exist on the network.
Use the following procedure to add five users to the sharedĆuser
Executive.
Step 1.
Insert the Executive software disk labeled Add Users" in
floppy drive A: or B:.
Type A:\ADDUSER <CR> or B:\ADDUSER <CR>
You will be prompted for the network server directory
where the Executive software is located.
Step 2.
Enter the directory path, e.g.,
<DRV>:\<RPE>\<AMX4>.
The current number of users will be displayed and you
will be prompted for the new user limit.
Step 3.
Enter the old number of users plus 5. (five maximum with
each license).
The new total number of users will be displayed.
Step 4.
If you have sharedĆuser DPS software, you must also
install additional DPS licenses in order to be able to
access DPS features on the five new network nodes.