Rockwell Automation 6189V-25HDDKIT Hard Drive Upgrade Kit - Manual (Page 3)

Hard Disk Drive Upgrade Kit 3
Publication 6181P-IN007C-EN-P - May 2006
Safety Precautions
Observe the following precautions when working with the computer’s hard disk
drive.
•
Do not touch internal components unnecessarily.
•
Always handle the drive by its metal frame.
•
Store the drive in an anti-static bag when it is not installed.
•
Never disconnect or install a drive with the power turned on.
SHOCK HAZARD
Failure to follow proper safety procedures could result in severe electrical
shock or damage to the computers.
ATTENTION
Disconnect all power from the computer before removing and installing
components. Failure to disconnect power could result in severe electrical shock
or damage to the computer.
ATTENTION
Electrostatic discharge (ESD) can damage the computer and components. Make
sure you work in a static-safe environment and wear a grounding strap
whenever handling circuit boards, memory, or other internal components.
ATTENTION Mechanical shock can damage hard disk drives (HDD). Do not drop or bump the
drive. Do not push on top cover of HDD. Do not touch printed circuit board
without ESD protection. See HDD label for additional care and handling
instructions.