Rockwell Automation 6189V-25HDDKIT Hard Drive Upgrade Kit - Manual (Page 9)

Hard Disk Drive Upgrade Kit 9
Publication 6181P-IN007C-EN-P - May 2006
7. Press the IDE adapter/cable firmly against the connector stabilization plate
to adhere to the doublestick tape.
8. Place rubber shock-mount strip B around the HDD as shown.
9. Place HDD bracket B onto rubber shock-mount strip B.
10. Attach the HDD assembly to the chassis using four M3 pan-head screws.
11. Affix the HDD upgrade label to the back cover of the unit with the left edge
aligned with the left edge of the nameplate, for easy reference.
Be sure not to cover any other labels.
Install New Operating System and Restore Data
With the new hard disk drive (HDD) installed, you are now ready to:
•
reinstall the operating system (OS).
•
install any application programs previously stored on the old HDD.
•
restore backup data.
TIP
Series A VersaView computers do not use an adapter. The IDE cable connects
directly to the HDD. The cable itself should be adhered to the tape.
1700P 1200P, 1500P
HDD Bracket B
Rubber
Shock-mount
Strip B
HDD
L-shaped Shim
Connector-
stabilization
Plate
HDD Bracket A
Doublestick tape
L-shaped Shim
Rubber
Shock-mount
Strip A
HDD Bracket A
Rubber
Shock-mount
Strip A
HDD
Connector-
stabilization
Plate
Doublestick tape
Rubber
Shock-mount
Strip B
HDD Bracket B
Top