Rockwell Automation 2755 Undecoded Hand-Held Scanner - Manual (Page 29)

Appendix B
Publication 2755-6.1
Scanner Pinout
Connections
Pin #1
Pin #10
Pin Signal Name Function
1, 2 Power Power input (4.8 to 14V DC).
3 Ground Power and signal ground.
4 Enable
Signal input to power-up the scanner, turn on the laser, turn on
scanning motor.
5 Start of Scan Sychronizes decode logic with the scanner.
6 Trigger Switch
Connected to trigger switch. This output is grounded when the
switch is pressed.
7 Decode LED Controls green decode LED.
8 Digitized Bar Pattern
Output provides a series of pulses proportional to the widths of
the bar code being scanned.
9 Motor Fail Powers down laser if scan motor fails.
10 Not Used