Rockwell Automation 2090-CPBM7DF-08AF Continuous-flex Power Cables with SpeedTec DIN Connector Installation Instruction - Manual (Page 6)

6 Continuous-flex Power and Brake Cables with SpeedTec DIN Connector
Publication 2090-IN026B-EN-P - January 2011
Schematics and Connector Pinouts for Cables
Wire colors and connector pinouts necessary to connect the cable to a servo system are shown in
the schematics.
2090-CPBM7DF-xxAFxx Cables
This cable is available in several wire gauges and lengths. Refer to the Kinetix Motion Control
Selection Guide, publication
GMC-SG001 , for this information and additional specifications.
(1) Wire gauge and connector keying varies based on motor and power requirements. Refer to the Kinetix Motion Control
Selection Guide, publication
GMC-SG001 , for additional information.
2090-CPWM7DF-xxAFxx Cables
This cable is available in several wire gauges and lengths. Refer to the Kinetix Motion Control
Selection Guide, publication
GMC-SG001 , for this information and additional specifications.
(1) Wire gauge and connector keying varies based on motor and power requirements. Refer to the Kinetix Motion Control
Selection Guide, publication
GMC-SG001 , for additional information.
U
V
W
GND
MBRK +
MBRK -
U
V
W
+
-
(1) Brown
Blue
Green/Yellow
Black (1)
(1)
18 AWG White
18 AWG Black
Shield
(1)
Twisted Wire Pair
360° shield-to-ground
connections required.
To
Motor
Connector
Backshell
Shielded 360° Shield
Wire Connection
To
Drive
(1)
U
V
W
U
V
W
GND
Brown
Black
Blue
Green/Yellow
(1)
(1)
(1)
Twisted Wire Pair
360° shield-
to-ground
connections
required.
To
Motor
Connector
Backshell
Shielded 360° Wire Connection
To
Drive