Rockwell Automation 2090-CPBM7DF-08AF Continuous-flex Power Cables with SpeedTec DIN Connector Installation Instruction - Manual (Page 7)

Continuous-flex Power and Brake Cables with SpeedTec DIN Connector 7
Publication 2090-IN026B-EN-P - January 2011
Specifications
These specifications provide information that is useful when installing a cable. Additional
specifications for each cable are available in the Kinetix Motion Control Selection Guide
,
publication GMC-SG001 .
2090-CPBM7DF-xxAFxx Cables
2090-CPWM7DF-xxAFxx Cables
Attribute 2090-CPBM7DF-10AFxx 2090-CPBM7DF-08AFxx
Wire size 10 AWG 8 AWG
Diameter 17.8 mm (0.7 in.) 20.5 mm (0.81 in.)
Bend radius (1)
(1) Apply the bend radius multiplier for operational (12 x dia.) and static (10 x dia.) bend radius to cables with a different
diameter. Refer to the diagram to locate the areas for flex (operational) and static (installation) bend areas.
Flex area 214 mm (8.5 in.) 250 mm (10 in.)
Installation areas
(2)
(2) The installation areas are approximately 300 mm (12 in.) in length at both ends of the cable. Secure this area with a rigid
mount that prevents the cable from flexing where it connects to other components.
178 mm (7.0 in.) 205 mm (8.1 in.)
Attribute 2090-CPWM7DF-10AFxx 2090-CPWM7DF-08AFxx
Wire size 10 AWG 8 AWG
Diameter 15.7 mm (0.6 in.) 20.3 mm (0.80 in.)
Bend radius
(1)
(1) Apply the bend radius multiplier for operational (12 x dia.) and static (10 x dia.) bend radius to cables with a different
diameter. Refer to the diagram to locate the areas for flex (operational) and static (installation) bend areas.
Flex area 200 mm (7.5 in.) 250 mm (10 in.)
Installation areas (2)
(2) The installation areas are approximately 300 mm (12 in.) in length at both ends of the cable. Secure this area with a rigid
mount that prevents the cable from flexing where it connects to other components.
157 mm (6.0 in.) 200 mm (8 in.)