Installing the hybrid terminator, E kinetix 6000m cable routing diagram d, Kinetix 6000m cable routing diagram – Rockwell Automation 2090-CTHP8 Kinetix 6000M Hybrid Power Terminator Installation Instructions User Manual
Page 4
4 Kinetix 6000M Hybrid Terminator
Publication 2090-IN035B-EN-P - March 2012
Installing the Hybrid Terminator
Follow these steps when installing the 2090-CTHP8 hybrid terminator.
Kinetix 6000M Cable Routing Diagram
IMPORTANT
The colored rings on the hybrid output connector and the terminator must match:
green-to-green.
PORT 1
PORT 2
NETWORK
R
R
G
G
R
R
G
G
2094-SEPM-B24-S
IPIM Module
2090-CHBIFS8-12AA
xx
IPIM-to-IDM Hybrid Cable
Connects the IPIM Module to the First IDM Unit
2090-CHBP8S8-12AA
x
Hybrid Cable
2090-CTHP8
Hybrid Terminator
MDF-SB1
xxx
Last IDM Unit
2090-CTSRP
Network Terminator
2090-CNSSPSS-12AAxx
or 2090-CNSSPRS-AAxx
Network Cable
2090-CNSSPSS-AAxx (shown), 2090-CNSRPRS-AAxx,
2090-CNSSPRS-AAxx, or 2090-CNSRPSS-AAxx
Network Cable
MDF-SB1
xxx
First IDM Unit