Rockwell Automation 6182 DiskOnChip Installation Instructions - Manual (Page 11)

Replacing or Upgrading DiskOnChip Memory 11
Publication 6182-IN002A-EN-P
9. Before installing the new replacement DOC memory chip, be sure it is
properly oriented with regard to the chip socket. On one end of the
DOC chip is a beveled corner, an inked notch, and a dot (see below).
Beveled corner
Dot
Inked notch
DiskOnChip Device
The chip socket itself contains a notch on one end (see below).
Chip Socket
Notch
Align the end of the DOC chip containing the inked notch, dot and
beveled corner with the end of the chip socket containing the notch.
10. To install the DOC memory chip, carefully align all the pins with the
chip socket. Gently push the pins into the socket until the chip is
seated against the socket base. Make sure not to bend any pins.
11. Follow the procedures on pages 7 - 8 to close the chassis.