Rockwell Automation 6182 DiskOnChip Installation Instructions - Manual (Page 7)

Replacing or Upgrading DiskOnChip Memory 7
Publication 6182-IN002A-EN-P
Opening and Closing the Chassis
You will have to open and close the RAC6182 chassis to access internal
components.
To open and close the chassis (display versions):
1. Disconnect power from the RAC6182 .
2. Using a Phillips screwdriver, remove the 3 screws securing the chassis
to the front bezel.
3. Open the hinged chassis away from the front bezel. Be careful not to
stress or disconnect the internal cables running between the chassis
and front bezel.
4. To close the chassis, slowly pivot the chassis back against the front
bezel. Be careful not to pinch the internal cables.