Rockwell Automation 6182 DiskOnChip Installation Instructions - Manual (Page 8)

8 Replacing or Upgrading DiskOnChip Memory
Publication 6182-IN002A-EN-P
5. Reinstall the 3 screws to secure the chassis to the front bezel. Tighten
the screws to a torque of 6 - 8 in–lbs (0.7 - 0.9 N•m).
To open and close the chassis (non-display versions):
1. Disconnect power from the RAC6182.
2. Remove the 4 nuts securing the chassis to the front plate.
6. To close the chassis, reinstall the 4 nuts to secure the chassis to the
front plate. Tighten the nuts to 6 - 8 in–lbs (0.7 - 0.9 N•m).