Rockwell Automation 6189V-xxxx Solid State Drive Upgrade Kit for Panel PC - Manual (Page 3)

Publication 6181P-IN006A-EN-P - January 2006
Solid State Drive Upgrade Kit 3
Parts List The solid state drive upgrade kit consists of:
•
Mounting bracket (1)
•
Adapter retention clamp (1)
•
M3 flat head screws (2)
•
4GB or 8GB solid state drive with WIN XP FES Image(1)
•
DIMM512MB memory sticks (2)
•
M3 pan head screws (4)
•
Tie wraps (2)
Required Tools Use a Phillips #2 screwdriver for installation.
Remove the Hard Disk Drive 1. Disconnect power from the computer.
2. Remove the screws securing the back cover.
3. Remove the four screws that fasten the hard disk drive assembly
to the chassis.
4. Lift the hard disk drive assembly out of the chassis.
1200P 1500P
IMPORTANT
Note the location and orientation of all cables before
you remove the existing hard drive and cabling, so
that you can reattach them correctly.