Rockwell Automation 6189V-xxxx Solid State Drive Upgrade Kit for Panel PC - Manual (Page 7)

Publication 6181P-IN006A-EN-P - January 2006
Solid State Drive Upgrade Kit 7
The retaining latches should be fully disengaged when
attempting to install a DIMM.
5. Press down firmly and uniformly on the DIMM to seat it in the
socket.
The latches should engage in the DIMM locking slot to secure
the part in place.
6. Replace the tie wrap around the DIMM and latches to fully
secure the DIMM in place.
7. Replace the back cover.
Label Placement After SSD installation is complete attach the following labels to the
back panel:
•
COA label
•
IDS image label
•
SSD upgrade label
Place SSD upgrade label on the back panel being careful not to cover
up any vent or screw.
Place the IDS image and COA labels over existing labels.
Memory Module Location